Oils for industry ORLEN OIL

Turbine oils containing specially selected mineral oil and additives with anti-corrosion, anti-oxidation, anti-wear, deemulsifying and anti-foaming properties. Designed for use in steam and water turbines and as a hydraulic fluid in turbine control systems.

Turbine oils containing specially selected mineral oil and additives with anti-corrosion, anti-oxidation, anti-wear, deemulsifying and anti-foaming properties. Designed for use in gas turbines, rotary compressors, can be used in steam and water turbines and as a hydraulic fluid in turbine control systems.

High-quality turbine oils containing special Group III oils and quality additives. Designed for use in gas turbines, steam turbines, combined cycle gas turbines (CCGT), compressors and associated gearboxes for the longest possible operating cycles.

CORVUS oils are lubricants for lubricating rotary air compressors operating in medium operating conditions with varying operating temperatures. They are used, among others, in the power industry for combined systems of pumps, compressors, turbines with gears and clutches, and rotary turbocompressors.

L-DAA oil is an oil for lubricating reciprocating air compressors operating in light to medium operating conditions. Due to its increased thermal resistance, it has a very low coking ability and is resistant to emulsion formation.

Hydraulic oils with extended change intervals and containing a special low ash quality package with anti-corrosion, anti-oxidation, lubricating, deemulsifying and anti-foaming properties. HYDROMIL L-HL oils are designed for medium duty hydraulic drive and control systems.

AEROMIL SYNTHETIC CLP 320 – Highest quality oil dedicated to wind turbine gearboxes. Based on a synthetic base, which provides exceptional thermal stability, increased resistance to oxidation and the ability to handle very high loads. LOTOS AEROMIL SYNTHETIC CLP 320 meets the requirements of DIN 51517 part. 3, ISO 12925- CKD, CKSMP, AGMA 9005 F 16, ISO 3448: VG 320 and IEC 61400-04.

High-quality mineral hydraulic oil dedicated to wind turbine systems. The oil contains a properly selected set of ashless additives with viscosity-temperature, anticorrosive, antioxidant, lubricating, deemulsifying and anti-foaming properties. It is compatible with non-ferrous metal alloys used in the construction of hydraulic systems.

Transmil Synthetic Extra PG fully synthetic gear oil dedicated to industrial transmissions and other equipment operating under extremely harsh operating conditions. Especially recommended for worm gearboxes, wind turbine gearboxes and rotary compressors. Produced on the basis of polyalkyleneglycols (PAGs).

EMULKOP EKO emulsifying oil is intended for the preparation of flame-retardant HFAE-class hydraulic fluids, mainly for power hydraulics in underground workings of mining plants. The recommended working concentration is a maximum of 1%, indicated 0.5%. It is approved by the Central Mining Institute. Use diluted.

Top quality, fully synthetic Transmil Synthetic gear oil dedicated to industrial transmissions and other equipment operating under extremely severe operating conditions, i.e. under very high mechanical and thermal loads, both at low and high temperatures. Produced on a PAO basis. It has GIG approval.

Premium mineral gear oil. Designed for spur gears and gears, bevel gears, planetary gears, helical gears and gearmotors, including those exposed to micropitting and increased corrosive effects.

TRANSMIL SP oils are dedicated to industrial transmissions and machinery operating in very harsh conditions. They have enhanced lubricating, anticorrosive and antioxidant properties.

TRANSMIL CLP oils are dedicated to medium- and heavy-duty industrial gearboxes and other machines that require an oil with increased lubricating film strength for loading. Ash-free additives ensure extended replacement intervals, as well as high cleanliness of lubricated working systems.

HYDRAX HLP hydraulic oils are designed for highly loaded hydraulic drive and control systems. Recommended in systems requiring oils with improved hydrolytic stability and high anti-wear properties, especially for operation in underground mine workings. It has GIG approval.

Oil designed to lubricate heavy-duty diesel railroad internal combustion engines.

GERAX TKD oils are hydraulic and gear oils used to lubricate hydraulic systems and mechanical transmissions. Used for gearboxes, power transmission systems and hydraulic systems of tractors and loaders.

Engine oil designed for use in diesel engines of trucks, vans, buses, railroads, other land and marine vehicles, where high potential for cleaning and neutralizing properties is required. Oil designed for engines and applications where it is acceptable to use API CD or lower grade oil and the appropriate viscosity grade.

Seasonal summer engine oil providing good lubrication of four-stroke diesel engines used in machinery engines, where a sufficiently high potential of cleaning and neutralizing properties is required and oils of this quality class and appropriate viscosity are allowed.